optoway nu-33b54b-r/-p *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2004 v3.0 1 nu-33b54b-r / nu-33b54b-p / nu-33b54b-r / nu-33b54b-p 155 mbps 1310 nm burst mode tx / 622 mbps 1490 nm continuous-mode rx 3.3v, 2x5 sff package, class b b-pon onu transceiver ********************************************************************************************************************************************************************** features l optical network unit (onu) for itu-t g.983.3 class b b-pon l 1-fiber bi-directional wdm sm transceiver l 155 mbps / 1310 nm burst-mode transmitter l 622 mbps / 1490 nm continuous-mode receiver with 2r output l 2x5 package with sc receptacle: nu-33b54b-r l 2x5 package with sc/pc pigtail: nu-33b54b-p l 0 to 70 o c operating temperature: nu-33b54b-r l -40 to 85 o c operating temperature: nu-33b54b-r-a l single +3.3 v power supply l lvpecl differential inputs and outputs l lvttl tx shutdown input l lvttl rx loss signal output l wave solderable and aqueous washable l class 1 laser international safety standard iec 60825 compliant applications l fast ethernet pon system l broadband pon system l atm pon system description nu-33b54b series is optical network unit (onu) for itu-t g.983.3 b-pon with 622 mbps in downstream and 155 mbps in upstream. the nu-33b54b series is high performance module for point-to-multi-point (m2mp) system by using 1310 nm burst-mode transmitter and 1490 nm continuous-mode receiver. the transmitter section uses a 1310 nm multiple quantum well laser and is a class 1 laser compliant according to international safety standard iec 60825. the receiver section uses an integrated 1490 nm / 1550 nm detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. lvpecl interface is used for differential inputs and outputs. a lvttl logic interface simplifies interface to external circuitry. laser safety this single mode transceiver is a class 1 laser product. it complies with iec 60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx rx p/no. type speed (mb/s) (nm) power (dbm) type speed (mb/s) (nm) sens. (dbm) sat. (dbm) temp. ( o c) pin package nu-33b54b-r bm 155 1310 2 to -4 cnt, 2r 622 1490/1550 -29 -5 0 to 70 2x5 sff rec. nu-33b54b-r-a bm 155 1310 2 to -4 cnt, 2r 622 1490/1550 -29 -5 -40 to 85 2x5 sff rec. nu-33b54b-p bm 155 1310 2 to -4 cnt, 2r 622 1490/1550 -29 -5 0 to 70 2x5 sff pig. NU-33B54B-P-A bm 155 1310 2 to -4 cnt, 2r 622 1490/1550 -29 -5 -40 to 85 2x5 sff pig. note: 1. xx-xxxxxx-k, k=r, sc receptacle, k=p, sc/pc pigtail with fiber length 50 cm. 3. bm: burst mode; cnt: continuous mode; sff: small form factor package.
optoway nu-33b55b-r/-p *********************************************************************************************************************************************************************** ************************************************************************************************************************************************************************ optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2004 v3.0 2 absolute maximum ratings parameter symbol min. max. unit notes power supply voltage vcc 0 4 v input voltage gnd vcc v output current iout 0 30 ma operating temperature topr 0 70 o c with air flow 1m/sec storage temperature tstg -40 85 o c soldering temperature 260 o c 10 seconds on leads only bending radius of fiber 30 mm for pigtail product stress in excess of the maximum absolute ratings can cause permanent damage to the module. recommended operating conditions parameter symbol min. max. unit notes power supply voltage vcc 3.13 3.47 v power supply current icc tx+rx 250 ma operating temperature topr 0 70 o c with air flow 1m/sec transmitter specifications ( 0 o c < topr < 70 o c, 3.13v < vcc < 3.47v ) parameter symbol min. typ. max. units notes optical optical transmit power po -4 2 dbm 1 output center wavelength l 1260 1310 1360 nm output spectrum width ? rms 4 nm rms ( ) extinction ratio e r 10 db background light bdl -35 dbm without input to transmitter data rate 155 170 mb/s optical rise time 1.0 2.0 ns 10% to 90% values optical fall time 1.0 2.0 ns 10% to 90% values relative intensity noise rin -120 db/hz total jitter 1 ns electrical data input current C low -350 m a data input current C high 350 m a differential input voltage v ih - v il 300 1600 mv data input voltage C low v il - v cc -2.0 -1.58 v 3 data input voltage -- high v ih - v cc -1.1 -0.74 v 3 shutdown input voltage -- low v tshdn,l 0 0.8 v tx output disable shutdown input voltage -- high v tshdn,h 2.0 vcc v tx output enable shut off time for tx shutdown t dis 30 m s 1. output power is power coupled into a 9/125 m m single mode fiber. 2. these inputs are compatible with 10k, 10kh and 100k ecl and lvpecl inputs.
optoway nu-33b55b-r/-p *********************************************************************************************************************************************************************** ************************************************************************************************************************************************************************ optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2004 v3.0 3 receiver characteristics ( 0 o c < topr < 70 o c, 3.13v < vcc < 3.47v ) parameter symbol min. typ. max. units notes optical sensitivity sen -29 dbm 4 saturation optical power sat -5 4 wavelength of operation 1480 1500 nm 5,6 signal detect assert level pa -29 signal detect deassert level pd -40 signal detect hysteresis 1.0 4.0 db data rate 622 650 mb/s optical return loss 14 db electrical data output voltage C low v ol - v cc -2.0 -1.58 v 7 data output voltage C high v oh - v cc -1.1 -0.74 v 7 sd output voltage -- low v ol - v cc 0.8 v sd output voltage -- high v oh - v cc 2.0 v signal detect assert time as max 100 m s off to on signal detect deassert time ans max 300 m s on to off 4. sensitivity and saturation levels at ber 1e-10 for a 2 23 -1 prbs @er=10. 5. at least 30 db optical isolation for the wavelength 1260 to 1360 nm. 6. 7. these inputs are compatible with 10k, 10kh and 100k ecl and lvpecl outputs. connection diagram pin i/o symbol notes 1 rxgnd directly connect this pin to the receiver ground plane 2 rxvcc +3.3v dc power for the receiver section 3 o los loss signal output. active low indicates a loss of receiving optical signal. 4 o rd - receiver dataout bar. see recommended circuit schematic 5 o rd+ receiver dataout. see recommended circuit schematic 6 txvcc +3.3v dc power for the transmitter section 7 txgnd directly connect this plan to the transmitter ground plane 8 i tx shut transmitter shutdown input. active low. c onnect this pin to +3.3v ttl logic 0 to disable tx. this pin is internally pulled to high . 9 i td+ transmitter data in. see recommended circuit schematic 10 i td- transmitter data in bar. see recommended circuit schematic ms ms mounting studs. connect to chassis ground
optoway nu-33b55b-r/-p *********************************************************************************************************************************************************************** ************************************************************************************************************************************************************************ optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2004 v3.0 4 recommended circuit schematic vcc 3.3v 10nf 10uf 1uh 1uh z=50r z=50r z=50r z=50r 100r lvpecl lvpecl vcc 3.3v vcc 3.3v td+ td- cdr or phy device ld driver post amp tx- tx+ tx gnd rx gnd rx+ rx- 10nf 10uf tx vcc rx vcc sff onu module 1 4 5 7 10 2 6 9 8 sd (lvttl) 130r 82r 82r 130r vcc 3.3v ben (lvttl) 3 depend on customer's phy package diagram units in mm 1) sc receptacle 1 3 . 5 9 1 0 . 1 6 m a x 3 . 4 8 9 . 8 0 4.91 1.78 49.40 11.98 29.82 m a x
optoway nu-33b55b-r/-p *********************************************************************************************************************************************************************** ************************************************************************************************************************************************************************ optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2004 v3.0 5 2) pigtail 500 50 49.40 11.98 29.82 4.91 1 0 . 1 6 1 3 . 5 9 m a x 1.78 3 . 4 8 9 . 8 0 m a x note: specifications subject to change without notice.
|
